Sample Test Cases

From ReliSourceWiki

(Difference between revisions)
Jump to: navigation, search
 
(3 intermediate revisions not shown)
Line 42: Line 42:
|}
|}
-
The XML structure of the case will look like as follows:
+
* The XML structure that is generated by MEI Automated Test Tool of the case will look like as follows:
<pre>
<pre>
<?xml version="1.0"?>
<?xml version="1.0"?>
-
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="remove_cashbox">
+
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="standard_stack_note">
-
   <description>this case is uesd to check remove cashbox</description>
+
   <description>standard stack note test</description>
   <phases>
   <phases>
     <phase name="phase0_wait">
     <phase name="phase0_wait">
Line 78: Line 78:
     </phase>
     </phase>
     <phase name="phase1_idle">
     <phase name="phase1_idle">
-
       <description>phase idle</description>
+
       <description>idle check</description>
       <pollRate>
       <pollRate>
         <min_rate>200</min_rate>
         <min_rate>200</min_rate>
Line 84: Line 84:
       </pollRate>
       </pollRate>
       <opm>
       <opm>
 +
        <request>EBDS_DENOM1_ON</request>
         <request>EBDS_ORIENTATION_CONTROL_4_way</request>
         <request>EBDS_ORIENTATION_CONTROL_4_way</request>
         <request>EBDS_PUP_A</request>
         <request>EBDS_PUP_A</request>
Line 90: Line 91:
       <prompt>
       <prompt>
         <template>0</template>
         <template>0</template>
-
         <display_message>Remove cashbox</display_message>
+
         <display_message>FEED 100 TAKA NOTE</display_message>
       </prompt>
       </prompt>
       <triggers>
       <triggers>
-
         <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
+
         <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
-
           <next>phase2_verify</next>
+
           <next>phase2_escrow</next>
           <conditions>
           <conditions>
             <IMF>
             <IMF>
-
               <response>EBDS_LRC_OFF</response>
+
               <response>EBDS_ESCROWED</response>
             </IMF>
             </IMF>
           </conditions>
           </conditions>
Line 103: Line 104:
         <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
         <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
           <next>FAIL</next>
           <next>FAIL</next>
-
           <duration>15000</duration>
+
           <duration>20000</duration>
         </trigger>
         </trigger>
       </triggers>
       </triggers>
     </phase>
     </phase>
-
     <phase name="phase2_verify">
+
     <phase name="phase2_escrow">
-
       <description>verification of cashbox removal</description>
+
       <description>escrow mode test</description>
       <pollRate>
       <pollRate>
         <min_rate>200</min_rate>
         <min_rate>200</min_rate>
Line 114: Line 115:
       </pollRate>
       </pollRate>
       <opm>
       <opm>
 +
        <request>EBDS_DENOM1_ON</request>
         <request>EBDS_ORIENTATION_CONTROL_4_way</request>
         <request>EBDS_ORIENTATION_CONTROL_4_way</request>
         <request>EBDS_PUP_A</request>
         <request>EBDS_PUP_A</request>
-
         <request>EBDS_ESCROW_MODE_ON</request>
+
         <request>EBDS_BILL_STACK_ON</request>
       </opm>
       </opm>
-
      <prompt>
 
-
        <template>1</template>
 
-
        <display_message>IS THE YELLOW BUTTON ON?</display_message>
 
-
      </prompt>
 
       <triggers>
       <triggers>
-
         <trigger xsi:type="ManualTrigger" name="trigger2_yes" type="Manual">
+
         <trigger xsi:type="MessageTrigger" name="trigger2" type="Message">
-
           <next>PASS</next>
+
           <next>phase3_acceptance</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_ESCROWED</response>
 +
            </IMF>
 +
          </conditions>
         </trigger>
         </trigger>
-
         <trigger xsi:type="ManualTrigger" name="trigger2_no" type="Manual">
+
         <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
           <next>FAIL</next>
           <next>FAIL</next>
 +
          <duration>10000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase3_acceptance">
 +
      <description>acceptance check</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_DENOM1_ON</request>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger3" type="Message">
 +
          <next>PASS</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_STACKED</response>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_IDLE</response>
 +
            </IMF>
 +
          </conditions>
         </trigger>
         </trigger>
         <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
         <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
           <next>FAIL</next>
           <next>FAIL</next>
-
           <duration>15000</duration>
+
           <duration>5000</duration>
         </trigger>
         </trigger>
       </triggers>
       </triggers>
Line 178: Line 208:
|}
|}
 +
* The XML structure that is generated by MEI Automated Test Tool of the case will look like as follows:
 +
<pre>
 +
<?xml version="1.0"?>
 +
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="remove_cashbox">
 +
  <description>this case is uesd to check remove cashbox</description>
 +
  <phases>
 +
    <phase name="phase0_wait">
 +
      <description>wait for idle</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger0" type="Message">
 +
          <next>phase1_idle</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_IDLE</response>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_LRC_ON</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>10000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase1_idle">
 +
      <description>phase idle</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <prompt>
 +
        <template>0</template>
 +
        <display_message>Remove cashbox</display_message>
 +
      </prompt>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
 +
          <next>phase2_verify</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_LRC_OFF</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>15000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase2_verify">
 +
      <description>verification of cashbox removal</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <prompt>
 +
        <template>1</template>
 +
        <display_message>IS THE YELLOW BUTTON ON?</display_message>
 +
      </prompt>
 +
      <triggers>
 +
        <trigger xsi:type="ManualTrigger" name="trigger2_yes" type="Manual">
 +
          <next>PASS</next>
 +
        </trigger>
 +
        <trigger xsi:type="ManualTrigger" name="trigger2_no" type="Manual">
 +
          <next>FAIL</next>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>15000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="PASS" />
 +
    <phase name="FAIL" />
 +
  </phases>
 +
</testcase>
 +
</pre>
{| {{table}} style="width:600px"
{| {{table}} style="width:600px"
Line 221: Line 349:
|  
|  
|}
|}
 +
 +
* The XML structure that is generated by MEI Automated Test Tool of the case will look like as follows:
 +
<pre>
 +
<?xml version="1.0"?>
 +
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="stack_extended_note">
 +
  <description>stack extended note check</description>
 +
  <phases>
 +
    <phase name="phase0_wait">
 +
      <description>wait for idle</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger0" type="Message">
 +
          <next>phase1_idle</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_IDLE</response>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_LRC_ON</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>10000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase1_idle">
 +
      <description>idle mode</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
        <request>EBDS_EXPANDED_NOTE_REPORTING_ON</request>
 +
      </opm>
 +
      <prompt>
 +
        <template>0</template>
 +
        <display_message>FEED 100 TAKA NOTE</display_message>
 +
      </prompt>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
 +
          <next>phase2_escrow</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_EXPANDED_NOTE_REPLY</response>
 +
              <value>BDT0100</value>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_ESCROWED</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>20000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase2_escrow">
 +
      <description>escrow mode</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
        <request>EBDS_BILL_STACK_ON</request>
 +
        <request>EBDS_EXPANDED_NOTE_REPORTING_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger2" type="Message">
 +
          <next>phase3_acceptance</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_EXPANDED_NOTE_REPLY</response>
 +
              <value>BDT0100</value>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_ESCROWED</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>10000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase3_acceptance">
 +
      <description>acceptance</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
        <request>EBDS_EXPANDED_NOTE_REPORTING_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger3" type="Message">
 +
          <next>PASS</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_STACKED</response>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_IDLE</response>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_EXPANDED_NOTE_REPLY</response>
 +
              <value>BDT0100</value>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="PASS" />
 +
    <phase name="FAIL" />
 +
  </phases>
 +
</testcase>
 +
</pre>
Line 275: Line 541:
|  
|  
|}
|}
 +
 +
* The XML structure Generated by MEI Automated Test Tool will look like as follows:
 +
<pre>
 +
<?xml version="1.0"?>
 +
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="return_standard_note">
 +
  <description>case of returning standard note</description>
 +
  <phases>
 +
    <phase name="phase0_wait">
 +
      <description>wait for idle</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger0" type="Message">
 +
          <next>phase1_idle</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_IDLE</response>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_LRC_ON</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>10000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase1_idle">
 +
      <description>idle mode</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_DENOM1_ON</request>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <prompt>
 +
        <template>0</template>
 +
        <display_message>FEED A 100 TAKA NOTE</display_message>
 +
      </prompt>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
 +
          <next>phase2_escrow</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_ESCROWED</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>20000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase2_escrow">
 +
      <description>escrow check</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_DENOM1_ON</request>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
        <request>EBDS_BILL_RETURN_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger2" type="Message">
 +
          <next>phase3_returning</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_ESCROWED</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>10000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase3_returning">
 +
      <description>returning standard note</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <triggers>
 +
        <trigger xsi:type="MessageTrigger" name="trigger3" type="Message">
 +
          <next>phase4_verify</next>
 +
          <conditions>
 +
            <IMF>
 +
              <response>EBDS_RETURNED</response>
 +
            </IMF>
 +
            <IMF>
 +
              <response>EBDS_IDLE</response>
 +
            </IMF>
 +
          </conditions>
 +
        </trigger>
 +
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
 +
          <next>FAIL</next>
 +
          <duration>10000</duration>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="phase4_verify">
 +
      <description>verify return</description>
 +
      <pollRate>
 +
        <min_rate>200</min_rate>
 +
        <max_rate>200</max_rate>
 +
      </pollRate>
 +
      <opm>
 +
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
 +
        <request>EBDS_PUP_A</request>
 +
        <request>EBDS_ESCROW_MODE_ON</request>
 +
      </opm>
 +
      <prompt>
 +
        <template>1</template>
 +
        <display_message>WAS A 100 TAKA NOTE RETURNED??</display_message>
 +
      </prompt>
 +
      <triggers>
 +
        <trigger xsi:type="ManualTrigger" name="trigger4_yes" type="Manual">
 +
          <next>PASS</next>
 +
        </trigger>
 +
        <trigger xsi:type="ManualTrigger" name="trigger4_no" type="Manual">
 +
          <next>FAIL</next>
 +
        </trigger>
 +
      </triggers>
 +
    </phase>
 +
    <phase name="PASS" />
 +
    <phase name="FAIL" />
 +
  </phases>
 +
</testcase>
 +
</pre>

Latest revision as of 04:42, 5 August 2011

Test Case Name Stack standard note
Phase 0Wait for Idle
OPMStandard poll AND Escrow checkbox
Trigger IMFIdle and LRC bit on.Next phaseIdle
Trigger TimeoutWait 10sNext phase FAIL
Phase 1Idle
User prompt"Feed a $5 note"
OPMStandard poll AND Escrow checkbox
Trigger IMFEscrow bit AND note index 3. Remove prompt.Next phaseEscrow
Trigger TimeoutWait 20sNext phaseFAIL
Phase 2Escrow
OPMStandard poll AND stack checkbox.
Trigger IMFEscrow bit AND note index 3Next PhaseNote Acceptance
Trigger TimeoutWait 10sNext phaseFAIL
Phase 3Note Acceptance
OPMStandard poll AND Escrow checkbox
Trigger IMFStacked AND Idle bits AND note index 3Next phasePASS
Trigger TimeoutWait 5sNext phaseFAIL
  • The XML structure that is generated by MEI Automated Test Tool of the case will look like as follows: 
<?xml version="1.0"?>
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="standard_stack_note">
  <description>standard stack note test</description>
  <phases>
    <phase name="phase0_wait">
      <description>wait for idle</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger0" type="Message">
          <next>phase1_idle</next>
          <conditions>
            <IMF>
              <response>EBDS_IDLE</response>
            </IMF>
            <IMF>
              <response>EBDS_LRC_ON</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase1_idle">
      <description>idle check</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_DENOM1_ON</request>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <prompt>
        <template>0</template>
        <display_message>FEED 100 TAKA NOTE</display_message>
      </prompt>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger1"  type="Message">
          <next>phase2_escrow</next>
          <conditions>
            <IMF>
              <response>EBDS_ESCROWED</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>20000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase2_escrow">
      <description>escrow mode test</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_DENOM1_ON</request>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_BILL_STACK_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger2" type="Message">
          <next>phase3_acceptance</next>
          <conditions>
            <IMF>
              <response>EBDS_ESCROWED</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase3_acceptance">
      <description>acceptance check</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_DENOM1_ON</request>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger3" type="Message">
          <next>PASS</next>
          <conditions>
            <IMF>
              <response>EBDS_STACKED</response>
            </IMF>
            <IMF>
              <response>EBDS_IDLE</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>5000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="PASS" />
    <phase name="FAIL" />
  </phases>
</testcase>
Test Case Name Remove cashbox ' '
Phase 0Wait for Idle
OPMStandard poll AND Escrow checkbox
Trigger IMFIdle and LRC bit on.Next phaseIdle
Trigger TimeoutWait 10sNext phase FAIL
Phase 1Idle
User prompt"Remove the cashbox"
OPMStandard poll AND Escrow checkbox
Trigger IMFLRC bit off. Remove prompt.Next phaseVerify Removed
Trigger TimeoutWait 20sNext phaseFAIL
Phase 2Verify Removed
User prompt"Is the yellow LED on?" Yes or No buttons.
OPMStandard poll AND Escrow checkbox
Trigger ManualYes button pressed. Remove prompt.Next phasePASS
Trigger ManualNo button pressed. Remove prompt.Next phaseFAIL
  • The XML structure that is generated by MEI Automated Test Tool of the case will look like as follows: 
<?xml version="1.0"?>
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="remove_cashbox">
  <description>this case is uesd to check remove cashbox</description>
  <phases>
    <phase name="phase0_wait">
      <description>wait for idle</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger0" type="Message">
          <next>phase1_idle</next>
          <conditions>
            <IMF>
              <response>EBDS_IDLE</response>
            </IMF>
            <IMF>
              <response>EBDS_LRC_ON</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase1_idle">
      <description>phase idle</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <prompt>
        <template>0</template>
        <display_message>Remove cashbox</display_message>
      </prompt>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
          <next>phase2_verify</next>
          <conditions>
            <IMF>
              <response>EBDS_LRC_OFF</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>15000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase2_verify">
      <description>verification of cashbox removal</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <prompt>
        <template>1</template>
        <display_message>IS THE YELLOW BUTTON ON?</display_message>
      </prompt>
      <triggers>
        <trigger xsi:type="ManualTrigger" name="trigger2_yes" type="Manual">
          <next>PASS</next>
        </trigger>
        <trigger xsi:type="ManualTrigger" name="trigger2_no" type="Manual">
          <next>FAIL</next>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>15000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="PASS" />
    <phase name="FAIL" />
  </phases>
</testcase>
Test Case Name Stack extended note ' '
Phase 0Wait for Idle
OPMStandard poll AND Escrow checkbox
Trigger IMFIdle and LRC bit on.Next phaseIdle
Trigger TimeoutWait 10sNext phase FAIL
Phase 1Idle
User prompt"Feed a $5 note"
OPMStandard poll AND extended note checkbox AND Escrow checkbox
Trigger IMFEscrow bit AND extended type 7 subtype 2 message with ASCII data "USD005". Remove prompt.Next phaseEscrow
Trigger TimeoutWait 20s. Remove prompt.Next phaseFAIL
Phase 2Escrow
OPMStandard poll AND extended note checkbox AND stack checkbox AND Escrow checkbox
Trigger IMFEscrow bit AND extended type 7 subtype 2 message with ASCII data "USD005".Next PhaseNote Acceptance
Trigger TimeoutWait 10sNext phaseFAIL
Phase 3Note Acceptance
OPMStandard poll AND extended note checkbox AND Escrow checkbox
Trigger IMFStacked AND Idle bits AND extended type 7 subtype 2 message with ASCII data "USD005".Next phasePASS
Trigger TimeoutWait 5sNext phaseFAIL
  • The XML structure that is generated by MEI Automated Test Tool of the case will look like as follows: 
<?xml version="1.0"?>
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="stack_extended_note">
  <description>stack extended note check</description>
  <phases>
    <phase name="phase0_wait">
      <description>wait for idle</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger0" type="Message">
          <next>phase1_idle</next>
          <conditions>
            <IMF>
              <response>EBDS_IDLE</response>
            </IMF>
            <IMF>
              <response>EBDS_LRC_ON</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase1_idle">
      <description>idle mode</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
        <request>EBDS_EXPANDED_NOTE_REPORTING_ON</request>
      </opm>
      <prompt>
        <template>0</template>
        <display_message>FEED 100 TAKA NOTE</display_message>
      </prompt>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
          <next>phase2_escrow</next>
          <conditions>
            <IMF>
              <response>EBDS_EXPANDED_NOTE_REPLY</response>
              <value>BDT0100</value>
            </IMF>
            <IMF>
              <response>EBDS_ESCROWED</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" type="Timeout">
          <next>FAIL</next>
          <duration>20000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase2_escrow">
      <description>escrow mode</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
        <request>EBDS_BILL_STACK_ON</request>
        <request>EBDS_EXPANDED_NOTE_REPORTING_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger2" type="Message">
          <next>phase3_acceptance</next>
          <conditions>
            <IMF>
              <response>EBDS_EXPANDED_NOTE_REPLY</response>
              <value>BDT0100</value>
            </IMF>
            <IMF>
              <response>EBDS_ESCROWED</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase3_acceptance">
      <description>acceptance</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
        <request>EBDS_EXPANDED_NOTE_REPORTING_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger3" type="Message">
          <next>PASS</next>
          <conditions>
            <IMF>
              <response>EBDS_STACKED</response>
            </IMF>
            <IMF>
              <response>EBDS_IDLE</response>
            </IMF>
            <IMF>
              <response>EBDS_EXPANDED_NOTE_REPLY</response>
              <value>BDT0100</value>
            </IMF>
          </conditions>
        </trigger>
      </triggers>
    </phase>
    <phase name="PASS" />
    <phase name="FAIL" />
  </phases>
</testcase>


Test Case Name Return standard note ' '
Phase 0Wait for Idle
OPMStandard poll AND Escrow checkbox
Trigger IMFIdle and LRC bit on.Next phaseIdle
Trigger TimeoutWait 10sNext phase FAIL
Phase 1Idle
User prompt"Feed a $5 note"
OPMStandard poll AND Escrow checkbox
Trigger IMFEscrow bit AND note index 3. Remove prompt.Next phaseEscrow
Trigger TimeoutWait 20sNext phaseFAIL
Phase 2Escrow
OPMStandard poll AND return checkbox AND Escrow checkbox
Trigger IMFEscrow bit AND note index 3Next PhaseNote Returning
Trigger TimeoutWait 10sNext phaseFAIL
Phase 3Note Returning
OPMStandard poll AND Escrow checkbox
Trigger IMFReturned AND Idle bits.Next phaseVerify Return
Trigger TimeoutWait 10sNext phaseFAIL
Phase 4Verify Return
User prompt"Was a $5 note returned" Yes or No buttons.
OPMStandard poll AND Escrow checkbox
Trigger ManualYes button pressed. Remove prompt.Next phasePASS
Trigger ManualNo button pressed. Remove prompt.Next phaseFAIL
  • The XML structure Generated by MEI Automated Test Tool will look like as follows: 
<?xml version="1.0"?>
<testcase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="return_standard_note">
  <description>case of returning standard note</description>
  <phases>
    <phase name="phase0_wait">
      <description>wait for idle</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger0" type="Message">
          <next>phase1_idle</next>
          <conditions>
            <IMF>
              <response>EBDS_IDLE</response>
            </IMF>
            <IMF>
              <response>EBDS_LRC_ON</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase1_idle">
      <description>idle mode</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_DENOM1_ON</request>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <prompt>
        <template>0</template>
        <display_message>FEED A 100 TAKA NOTE</display_message>
      </prompt>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger1" type="Message">
          <next>phase2_escrow</next>
          <conditions>
            <IMF>
              <response>EBDS_ESCROWED</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>20000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase2_escrow">
      <description>escrow check</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_DENOM1_ON</request>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
        <request>EBDS_BILL_RETURN_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger2" type="Message">
          <next>phase3_returning</next>
          <conditions>
            <IMF>
              <response>EBDS_ESCROWED</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase3_returning">
      <description>returning standard note</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <triggers>
        <trigger xsi:type="MessageTrigger" name="trigger3" type="Message">
          <next>phase4_verify</next>
          <conditions>
            <IMF>
              <response>EBDS_RETURNED</response>
            </IMF>
            <IMF>
              <response>EBDS_IDLE</response>
            </IMF>
          </conditions>
        </trigger>
        <trigger xsi:type="TimeoutTrigger" name="triggertimeout" type="Timeout">
          <next>FAIL</next>
          <duration>10000</duration>
        </trigger>
      </triggers>
    </phase>
    <phase name="phase4_verify">
      <description>verify return</description>
      <pollRate>
        <min_rate>200</min_rate>
        <max_rate>200</max_rate>
      </pollRate>
      <opm>
        <request>EBDS_ORIENTATION_CONTROL_4_way</request>
        <request>EBDS_PUP_A</request>
        <request>EBDS_ESCROW_MODE_ON</request>
      </opm>
      <prompt>
        <template>1</template>
        <display_message>WAS A 100 TAKA NOTE RETURNED??</display_message>
      </prompt>
      <triggers>
        <trigger xsi:type="ManualTrigger" name="trigger4_yes" type="Manual">
          <next>PASS</next>
        </trigger>
        <trigger xsi:type="ManualTrigger" name="trigger4_no" type="Manual">
          <next>FAIL</next>
        </trigger>
      </triggers>
    </phase>
    <phase name="PASS" />
    <phase name="FAIL" />
  </phases>
</testcase>


Test Case Name Request Application Software Version ' '
Phase 0Wait for Idle
OPMStandard poll AND Escrow checkbox
Trigger IMFIdle and LRC bit on.Next phaseIdle
Trigger TimeoutWait 10sNext phase FAIL
Phase 1Idle
OPMExtended type 6 message - Request application software version
Trigger IMFExtended type 6 AND data0 byte 0x0 AND data1 byte 0x0 AND 9 ASCII data bytes that match user configured application software part number.Next phasePASS
Trigger TimeoutWait 20sNext phaseFAIL
Retrieved from "http://meiwiki.relisource.com/index.php/Sample_Test_Cases"
Personal tools